Colour Palette mkII no signal
If your Palette is not passing a signal, please check the following:
- Empty Colour slots: make sure that no empty Colour slots are engaged. If a Colour slot is empty, engaging it will mute the signal.
- Signal path: confirm your routing by patching a cable directly from the output of your interface to the input of your interface.
- 500-series rack: if possible, test another module in the same slot the Palette was in, and try the Palette in a different slot
IC positions: Double check that all ICs are in the correct locations as show below.
- IC orientation: Make sure that the notches on the bodies of the ICs match the notches in the silk screen on the circuit board.